Your hot water heater is the device that gives you those blissful steamy showers in the morning and gives you the hot water you need to do your dishes every evening. If your hot water heater breaks down, it could be potentially devastating to your daily routine. Here are a few troubleshooting tips that can help you diagnose any issues you might be having and figure out if you need to call an emergency plumber to address the situation.
The Water Is Too Hot
Yes, your water heater can make your water too hot. This can be problematic if you have little ones taking baths or showers, as the hot water could scald their skin or cause serious injuries. The first thing you'll want to do to troubleshoot this issue is to check the thermostat. Your temperature settings may simply be too high. Adjust the maximum temperature to a degree you feel comfortable with, and the problem is solved. If, however, you continue to have problems with the temperature of your water, the thermostat for your hot water heater might be broken. Your emergency plumber can repair or replace the thermostat to get the proper water temperature back in your home.
Having water with a foul odor isn't great for bathing, cooking or drinking. If your water gives off an unpleasant odor no matter if it is hot or cold, you probably don't have an issue with your hot water heater at all. You may simply need a water filtration system, or if you have hard water, you may need a water softener. Your plumber can help you install either of these devices. In the event that your water only has an unpleasant odor when you run the hot water, then there may be an issue with the anode rod in the unit. This rod can wear away over time, and the result is corrosion that can give your water a smell that is similar to rotten eggs. You can replace this rod on your own if you are handy, or you can have your emergency plumber handle it for you.
Just because your hot water heater is functioning loudly doesn't mean there is a serious issue with the unit. In some cases, rumbling in the heater can be caused from a buildup of sediment. This sediment from your water tends to collect at the bottom of the tank. If left unattended, it can cause your water heater to overheat, so consider those rumbling sounds your alert to flush the tank and remove the sediment. You'll need to drain the hot water heater before flushing the tank. If you don't feel comfortable tackling this on your own, contact an emergency plumber to fix the issue before it becomes serious.
Keeping your hot water heater in good working condition means paying attention to all the signals the unit gives you. Whether your water is too hot, too cold or it smells funny, it can be trying to warn you that there is an issue with your hot water heater. Get more information here.